How To Use Aspire Revvo Tank
Filling this tank is super easy and convenient, the filling hole is inside the tank, which can be reached by using a gorilla bottle or just as simply by a glass dropper.
1. Locate your filling bottle/dropper onto the spring loaded filling tube and press it down (only minimal pressure is required).
2. Squeeze the filling bottle/dropper to fill the tank.
Coil installation
1. Unscrew and remove the top chamber.
2. Unscrew and remove the mounting screw.
3. Remove the used ARC coil by lifting over the filling tube.
4. Place a new coil over the filling tube; make sure the coil edge is lined up with the tank, and sits securely.
5. Screw the mounting screw back onto the base hardware.
6. Replace the top chamber.
Replacing glass
1. Unscrew and remove the glass securing ring from the base hardware.
2. Pull and remove the used glass tube.
3. Insert a new glass tube.
4. Screw the glass securing ring back onto the base hardware firmly, but do not over-tighten.
Protective cap
1. It is recommended to close the airflow slots and to use the provided protective cap when travelling or when the tank is not in use to avoid leakage and prevent dust and dirt from entering the top chamber.
2. It is also advisable to use the protective cap when carrying onto a plane as the cabin pressure can adversely affect the pressure inside the tank.
No comments